1. Home
  2. Portfolio Lighting Parts & Accessories
  3. Portfolio Model Parts Directory
  4. Portfolio UT1007-BR4-13CF1-P: Legacy Fluorescent Ceiling-Fixture Repair

📦Shop Portfolio-Compatible Lighting Parts on AmazonAffiliate link · We may earn a commission.🔧Find Discontinued Portfolio Parts on eBayAffiliate link · We may earn a commission.

A fluorescent fixture with two useful item references

UT1007-BR4-13CF1-P is recorded as a fluorescent flushmount ceiling fixture with item numbers 0031326 / 0432488. Keep the full model string—including its hyphens—and both item numbers in your records.

Older retail documentation can surface under an item number rather than the long model. Searching all three identifiers is more precise than searching only for “Portfolio 4-foot fluorescent fixture.”

Diffuser replacement is a geometry problem

For a broken flat diffuser, measure the fixture opening and an intact portion or panel if one remains. Record overall length and width, thickness, corner treatment, overlap hidden by the trim and how the panel enters or flexes into the frame.

Nominal fixture length is not a fabrication dimension. A panel cut to a generic four-foot size can be too wide, too narrow or unable to engage the retention channel.

Separate light-output faults from cover damage

A cracked diffuser does not explain lamps that fail to start or operate abnormally. Treat the cover as a mechanical component and the lighting circuit as a separate diagnostic problem.

Before replacing electrical components, identify the installed lamps and inspect the lampholders, conductors and any labeled internal components. This archive page does not assign an undocumented ballast or driver part number to UT1007-BR4-13CF1-P.

Photographs to take before fixture removal

Capture the product label, lamp layout, lampholders, wire-entry point, mounting locations and diffuser-retention edges. Once the fixture is down or discarded, those details are difficult to recover.

If the diffuser is the only failed part, also photograph an intact corner and the frame profile. Those images can help a local plastics or lighting-fabrication shop understand the required fit.

Fabricated diffuser versus complete-fixture replacement

When an original panel cannot be found, fabrication may be practical if the frame and electrical fixture remain serviceable. The replacement material still needs to be appropriate for the application and fit the retention system.

If the fixture also has significant electrical deterioration, compare the cost and scope of restoring both the diffuser and electrical system against replacing the complete fixture.

Symptom-to-next-check table for UT1007-BR4-13CF1-P

Observed conditionNext checkDiffuser is crackedMeasure panel geometry and retention; this is a mechanical repair.Lamps will not startDiagnose the electrical/fluorescent system separately from the diffuser.Label is hard to searchUse full model plus both items 0031326 and 0432488.Original panel unavailableProvide dimensions and an intact sample to a qualified plastics/lighting fabricator.

What is documented—and what is not

The current PortfolioLighting.net archive documents UT1007-BR4-13CF1-P as a fluorescent flushmount ceiling fixture, with item number 0031326 / 0432488, from the Classic indoor fluorescent fixture era. Specifications not stated in that record are not filled in from a neighboring model. Verify unknown electrical ratings, dimensions, connector details and replacement-part numbers from the physical label, original documentation or direct measurement.

UT1007-BR4-13CF1-P: keep both item numbers in the repair record

The site's archive identifies UT1007-BR4-13CF1-P as a fluorescent flushmount ceiling fixture and records item numbers 0031326 / 0432488. Search the full model plus both item references; older retail records may surface under an item number rather than the long model string.

Photograph the label before taking the fixture down. Also photograph the lamp arrangement, lampholders, wire-entry location, mounting points and the way the diffuser is retained.

Replacing the UT1007-BR4-13CF1-P diffuser

A diffuser replacement is a measurement problem. Record the actual opening, overall panel length and width, thickness, corner shape, hidden overlap and the direction the panel slides or flexes into the frame. “Four-foot fixture” is not a fabrication dimension.

If an original panel cannot be located, a plastics or lighting-fabrication shop may be able to evaluate a replacement from accurate dimensions and an intact sample. The Portfolio diffuser guide explains what to measure before contacting a fabricator.

Do not confuse a diffuser problem with a fluorescent electrical problem

A cracked cover does not explain lamps that fail to start, cycle or operate abnormally. Treat the diffuser as a mechanical repair and the lighting circuit as a separate diagnosis. Identify the installed lamps and inspect the lampholders, conductors and labeled internal components before buying electrical parts.

The archive does not establish a universal ballast or internal electrical replacement for this exact fixture. If the electrical system is also deteriorated, compare the scope of restoring both the cover and electrical components with replacing the complete ceiling fixture. Continue through the Portfolio indoor lighting center for that decision.

Continue from UT1007-BR4-13CF1-P to the correct Portfolio resource

Identity basis: PortfolioLighting.net Master Model Technical Database.

Start With the Evidence on the UT1007-BR4-13CF1-P in Front of You

The archive identifies UT1007-BR4-13CF1-P as a fluorescent flush-mount ceiling fixture and records item numbers 0031326 and 0432488. That distinction matters because a model page should narrow a repair, not encourage a guess. Before ordering a part or disconnecting anything, photograph the full product, the rating/model label, every accessible terminal or connector, and the way the product is mounted. Record lamp/socket and ballast evidence, diffuser dimensions, ceiling mounting footprint, and preserving fluorescent-system details before conversion. If the label is damaged, keep the readable characters exactly as they appear rather than “correcting” them to a similar Portfolio model. Small suffixes, finish codes and item numbers can separate products that look nearly identical in an online photo.

For this Portfolio fluorescent flush-mount ceiling fixture, build a short service record before changing the installation. Write down what still works, what failed, whether the failure is constant or intermittent, and what changed immediately before the problem appeared. A fixture that failed after landscaping work suggests a different first inspection than a fixture that slowly became intermittent after years outdoors. A transformer that is completely unresponsive is a different diagnostic problem from one whose controls work but whose downstream lights are dark. The point is to preserve clues while they are still visible.

How to Separate a UT1007-BR4-13CF1-P Problem From a System Problem

For UT1007-BR4-13CF1-P, do not assume the named product is the failed component simply because this is the model page you found. The archive identifies UT1007-BR4-13CF1-P as a fluorescent flush-mount ceiling fixture and records item numbers 0031326 and 0432488. Start by checking the failure boundary around this exact installation. Record lamp/socket and ballast evidence, diffuser dimensions, ceiling mounting footprint. Compare what happens at this product with what still works immediately upstream and downstream. That evidence tells you whether to stay on the UT1007-BR4-13CF1-P itself or move into the surrounding wiring, control, transformer, fixture or branch. Changing one variable at a time is especially important on older systems because several age-related problems can exist at once.

Use the symptom to choose the next guide instead of opening unrelated pages. Flush-Mount Guide is the best next step when the failure matches that system. Diffuser Replacement Guide provides the adjacent documentation or diagnostic path. That internal route is intentional: the model page establishes identity, while the specialist guide handles the broader electrical, mechanical or replacement decision.

Parts Matching: What Must Match and What Is Only a Clue

When matching parts for UT1007-BR4-13CF1-P, treat a seller photo or “fits Portfolio” claim as a research lead, not proof. The archive identifies UT1007-BR4-13CF1-P as a fluorescent flush-mount ceiling fixture and records item numbers 0031326 and 0432488. Match the interface that matters for this product: lamp/socket and ballast evidence, diffuser dimensions, ceiling mounting footprint. Photograph the original part beside a ruler or caliper when dimensions control fit, and preserve any molded or stamped identifiers. If the archive does not document a specification for UT1007-BR4-13CF1-P, do not import it from a similar-looking sibling model. An unknown field is safer than a confident but wrong compatibility assumption.

For UT1007-BR4-13CF1-P, pay particular attention to lamp/socket and ballast evidence and diffuser dimensions. A part from a sibling model can be a useful research lead, but it does not become compatible because the housing looks similar. When the archive does not document a specification, leave the field blank until the installed product supplies the evidence. The indoor-lighting hub is the better place to evaluate that component after you have captured the model-specific measurements.

Weather, Heat and Age: Read the Failure Pattern Before Replacing Parts

Age-related evidence on UT1007-BR4-13CF1-P should be read before it is cleaned away. Inspect lamp/socket and ballast evidence, diffuser dimensions, ceiling mounting footprint for corrosion, heat discoloration, water tracks, looseness, brittle sealing material or previous repair marks. Note whether the symptom follows rain, irrigation, temperature, run time or a control transition. Those patterns help distinguish a local mechanical or moisture problem from an electrical or control problem. Photograph deposits and wire positions before cleaning or disassembly so the repair record preserves how the failure actually presented.

Intermittent behavior deserves a timeline. Note whether the UT1007-BR4-13CF1-P changes after rain, irrigation, freezing temperatures, direct sun, long run time or a control transition. If the problem follows weather rather than the clock, inspect seals, connectors and exposed cable first. If it follows operating time, heat and load become more relevant. If it follows a schedule, timer, photocell or automation transition, the control path deserves attention. This is far more useful than replacing several parts at once and never learning which one caused the failure.

Repair or Replace the UT1007-BR4-13CF1-P? Use a Written Decision

A repair on UT1007-BR4-13CF1-P is most defensible when the failed component is identifiable, the surrounding housing or mounting remains sound, and the replacement can be matched from documented ratings and physical interfaces. The archive identifies UT1007-BR4-13CF1-P as a fluorescent flush-mount ceiling fixture and records item numbers 0031326 and 0432488. Replacement becomes more reasonable when damage reaches multiple components, weather sealing cannot be restored, structural parts are compromised or the required component cannot be identified with confidence. Write down why you chose repair or replacement; that reason should address the actual failure, not simply the age of the product.

If UT1007-BR4-13CF1-P ultimately needs replacement, build the specification from this installation rather than from appearance alone. The archive identifies UT1007-BR4-13CF1-P as a fluorescent flush-mount ceiling fixture and records item numbers 0031326 and 0432488. Preserve the mounting geometry, electrical markings, control arrangement and the reason the original unit failed. For this model, explicitly record lamp/socket and ballast evidence, diffuser dimensions, ceiling mounting footprint. A replacement that fits physically but changes the electrical or control relationship can create a new problem, while a new product installed into an unresolved wet connection, damaged cable or unstable mounting point can reproduce the old failure.

A Practical UT1007-BR4-13CF1-P Service Checklist

UT1007-BR4-13CF1-P service checklist: Before work, photograph the exact model/label and installation. Record lamp/socket and ballast evidence, diffuser dimensions, ceiling mounting footprint. During diagnosis, preserve terminal, connector and hardware positions and change one condition at a time. Before ordering, compare every documented identifier and fit-critical measurement with the proposed part. Before closing the repair, restore covers and seals correctly, confirm stable mounting, reproduce the original operating condition, and record the result. This turns the UT1007-BR4-13CF1-P page into a repeatable service record rather than a one-time troubleshooting note.

The safest shortcut on UT1007-BR4-13CF1-P is good documentation. A few minutes spent preserving the label, lamp/socket and ballast evidence, diffuser dimensions and the original symptom can prevent a wrong part order or an unnecessary full replacement. Keep the photos and measurements with this model record. If the same product fails again, you will know what was inspected, what changed and which evidence was confirmed on the physical UT1007-BR4-13CF1-P rather than borrowed from another Portfolio product.

UT1007-BR4-13CF1-P: Keep the Fluorescent Fixture Record Separate From Modern LED Replacements

Use the Flush-Mount Lighting hub for fixture-family context and Replacement Diffusers when the cover is the failed component. Keep item numbers 0031326/0432488 with the repair record. If the failure is electrical rather than mechanical, preserve socket, ballast and lamp information before deciding whether repair or a complete modern fixture replacement makes more sense.