Home › Portfolio Model Parts Directory › ODWW-1BKM

📦Shop Portfolio-Compatible Lighting Parts on AmazonAffiliate link · We may earn a commission.🔧Find Discontinued Portfolio Parts on eBayAffiliate link · We may earn a commission.

Outdoor Wall Lantern • Frosted Glass + Medium Base

Portfolio ODWW-1BKM / 0605399 Sandy Black Wall Lantern Parts & Repair Guide

Portfolio ODWW-1BKM, Lowe’s item 0605399, is a compact sandy-black outdoor wall lantern with one frosted glass shade. Surviving product data identifies a 10.75-inch height, 5.88-inch width, 7.88-inch depth and one E26 medium-base lamp up to 60 watts, while the manual documents the mounting strap and four decorative nuts.

ModelODWW-1BKM

Lowe’s item0605399

Lamp1 × E26, 60W max

Size10.75H × 5.88W × 7.88D in.

The glass shade is a primary identification feature

The manual lists one glass shade as a separate package component. If the shade is broken, measure its opening, height, widest point, retention holes or lip, and the spacing of the decorative fasteners. The fixture dimensions alone are not enough to buy replacement glass.

Four decorative nuts do two different jobs

The documentation shows four decorative nuts: two associated with the mounting screws and two with the glass shade. Keep those roles separate during disassembly. Mixing hardware that looks identical can create poor thread engagement or leave the shade insecure.

The mounting strap is preassembled to the fixture

The original mounting strap and its screws establish the wall-side geometry. If a secondhand ODWW-1BKM is missing the strap, measure screw spacing, thread and required projection from the backplate before choosing a universal bracket.

Known dimensions are useful for distinguishing look-alikes

Indexed product records identify approximately 10.75 inches high, 5.88 inches wide and 7.88 inches deep. Use all three dimensions plus the frosted shade and sandy-black finish when checking whether an unlabeled fixture is truly ODWW-1BKM.

Lamp replacement is E26 and 60 watts maximum

The documented configuration is one medium-base E26 lamp with a 60-watt maximum. LED replacements should remain within that electrical limit and fit the enclosed/shaded space. Check the LED manufacturer’s enclosed-fixture and wet-location guidance where applicable.

A cloudy shade and a failed socket are different repairs

Frosted glass can accumulate mineral film or interior moisture without an electrical failure. Remove power before service, inspect the shade and seals, then evaluate the socket separately. Replacing electrical parts will not correct a recurring water path.

Weather resistance depends on the installation

The product was sold for outdoor use, but wall-box condition and perimeter sealing remain critical. Inspect the surface behind the backplate and any gaps above the fixture when corrosion appears.

Discontinued-parts strategy

Preserve the original glass hardware and mounting strap. Generic fasteners are only candidates after thread and length are measured. For replacement glass, geometry and retention method matter more than a visual resemblance in an online listing.

ODWW-1BKM symptom map

SymptomInspect firstExact-model clueBroken frosted shadeShade measurements and decorative nutsOne separate glass shade is documented.Fixture looseMounting strap and two wall-side decorative nutsPreserve original strap geometry.Shade looseTwo shade-side decorative nutsDo not confuse them with mounting nuts.Dead lampE26 lamp, socket, supplyDocumented maximum is 60W.

What not to infer from the model family

The documentation supports this exact item’s dimensions, E26 lamp, glass shade and mounting arrangement. It does not prove that glass or decorative nuts from another ODWW or Portfolio lantern fit this model.

Where ODWW-1BKM fits in the Portfolio technical archive

Use this page for the exact ODWW-1BKM record. For broader identification and parts research, move upward to the Portfolio model parts directory or master model technical database. For exterior fixtures, the Portfolio outdoor lighting guide covers weather exposure and installation context; indoor vanity work belongs with the indoor lighting pillar.

ODWW-1BKM FAQ

What Portfolio item number matches ODWW-1BKM?

The surviving documentation pairs model ODWW-1BKM with Lowe’s item 0605399.

Can I use parts from a similar Portfolio fixture?

Only after verifying the actual dimensions, thread, electrical rating and retention method. A similar family name or appearance is not a compatibility guarantee.

Research standard for this model

This guide separates documented exact-model facts from repair inference. Where the surviving manual or archived product record does not establish a dimension or interchange, the page tells the owner what to measure rather than inventing a specification.