Home › Portfolio Model Parts Directory › LC0343BN

📦Shop Portfolio-Compatible Lighting Parts on AmazonAffiliate link · We may earn a commission.🔧Find Discontinued Portfolio Parts on eBayAffiliate link · We may earn a commission.

Flushmount Ceiling Fixture • Original Part Numbers Preserved

Portfolio LC0343BN / 0094552 Flushmount Parts & Repair Guide

Portfolio LC0343BN is unusually valuable to document because the surviving manual preserves four original replacement numbers instead of only generic hardware descriptions. Item 0094552 uses part 0094552-AA for the mounting strip, 0094552-BB for short mounting screws, 0094552-CC for long mounting screws and 0094552-DD for wire connectors. The manual also preserves lamp and dimming limits that matter when diagnosing a fixture that flickers, runs hot or behaves poorly on a dimmer.

ModelLC0343BN

Lowe’s item0094552

FixtureFlushmount ceiling fixture

Original hardware0094552-AA to -DD

Original replacement-part map

Original partManual descriptionWhat to verify today0094552-AAMounting stripOutlet-box hole spacing, fixture screw spacing and strip width.0094552-BBShort mounting screwMachine-screw diameter, pitch and length.0094552-CCLong mounting screwThread and protrusion needed to capture the ceiling plate.0094552-DDWire connectorConnector must be listed and sized for the actual conductor combination.

Lamp limits and the dimmer detail owners often miss

The manual allows a maximum 60-watt medium-base incandescent lamp or a maximum 13-watt CFL. It specifically warns against using the fixture on a dimming circuit with CFL bulbs, while noting that dimming is workable with the permitted incandescent lamp. For a modern LED retrofit, do not infer compatibility from those older statements alone: use a medium-base LED whose physical size fits the glass enclosure and whose manufacturer approves the intended enclosed-fixture and dimmer conditions.

The fixture is more than the glass shade

The package contents identify a threaded tube, finial, ceiling plate, glass shade and cap. A loose glass bowl can therefore originate at the finial/tube/cap stack rather than the glass itself. Before buying a replacement shade, measure the glass opening and also inspect the cap and threaded tube for bending, stripped threads or missing hardware. Tightening a damaged finial harder can crack the shade.

Mounting-strip problems versus electrical problems

A fixture that sags from the ceiling or will not sit flush is primarily a mounting problem. Compare the outlet-box attachment and long-screw spacing to the original mounting strip before replacing electrical parts. A fixture that is mechanically secure but does not light should be diagnosed at the lamp, supply connections and socket. This separation prevents a cosmetic mounting issue from turning into unnecessary rewiring.

Heat, conductor rating and safe replacement work

The manual calls for supply conductors rated at least 194°F (90°C). That is a meaningful clue on an older ceiling fixture because heat exposure can embrittle insulation near the canopy. If conductor insulation is cracked, scorched or brittle, stop treating the repair as a simple glass or bulb replacement. The Portfolio indoor-lighting pillar provides the broader ceiling-fixture pathway, while the parts hub is better for hardware identification.

What to record before shopping

Photograph the LC0343BN label, the glass profile, the finial and cap stack, the mounting strip and the socket marking. Record the shade opening, overall shade depth, threaded-tube diameter and usable thread length. Those measurements let you distinguish a true mechanical match from a listing that merely resembles the original fixture.

LC0343BN assembly stack: where a loose bowl actually originates

The glass shade is held in a vertical stack involving the ceiling plate, threaded tube, cap and finial. That means a bowl that appears “too loose” may not need different glass. First inspect whether the threaded tube is fully seated in the ceiling-plate bushing, whether the cap is oriented correctly and whether the finial has enough usable thread to secure the assembly without forcing the glass. A bent cap can load one edge of the shade and make an otherwise correct bowl look mis-sized.

When disassembling, support the glass with one hand before loosening the finial. Photograph the order of the cap and glass. If the threaded tube has been shortened, substituted or cross-threaded during an earlier repair, record that before searching for a replacement bowl because the altered hardware can be the real reason the shade will not tighten.

How to use the four original hardware numbers today

The original numbers are evidence of what Portfolio supplied, not a guarantee that old-stock parts remain available. For 0094552-AA, photograph the mounting strip and measure both the outlet-box screw spacing and the fixture-mounting screw spacing. For 0094552-BB and 0094552-CC, use a thread gauge or known matching nut to confirm the machine-screw thread before buying replacements. For 0094552-DD, prioritize a modern listed wire connector whose conductor range matches the actual wires rather than searching indefinitely for the historical connector package.

This is a useful example of when preserving an original part number and choosing a modern equivalent are different jobs. The mounting strip is geometry-sensitive; the wire connector is safety/listing-sensitive.

Symptom patterns unique to this flushmount layout

SymptomMost useful checkDo not assumeGlass bowl tiltsCap, threaded tube and finial alignmentThat the shade itself is wrong.Fixture will not sit flush to ceiling0094552-AA strip and long-screw projectionThat the ceiling plate is warped.CFL flickers on dimmerRemove dimming condition / verify lamp systemThat the fixture wiring has failed; the manual explicitly warns against CFL dimming.Incandescent runs excessively hotConfirm 60W maximum and ventilation conditionThat a higher-wattage lamp is acceptable because it fits the socket.Brittle wire insulation near canopyConductor condition and 90°C requirementThat a bulb change alone resolves the safety issue.

LED retrofit without erasing the original evidence

An LED retrofit can reduce lamp wattage, but the retrofit should still respect the medium-base socket, available enclosure space and the LED maker’s enclosed-fixture guidance. If the fixture is on a dimmer, compatibility becomes a three-part question: the LED lamp, the dimmer and the fixture environment. Keep a photo of the original LC0343BN label and manual limits with the home records so a later owner does not mistake a low-watt LED installation for evidence that the fixture was designed for any lamp that physically fits.

Where this exact model fits in the Portfolio archive

This page stays narrow: it documents LC0343BN rather than trying to become another sitewide directory. Use these broader resources only when the repair question moves beyond this exact fixture.

Master Model Technical Database

Use the database to cross-reference another Portfolio model or item number. It is the comprehensive model index, while this page remains specific to LC0343BN.

Model Parts Directory

Use the parts directory when the failed component may appear across multiple Portfolio products and you need a broader parts-oriented route.

LC0343BN FAQ

What are the original LC0343BN hardware numbers?

0094552-AA is the mounting strip, 0094552-BB the short mounting screw, 0094552-CC the long mounting screw and 0094552-DD the wire connector.

What bulb does LC0343BN use?

The manual specifies a medium-base lamp, with a 60-watt maximum for incandescent or 13-watt maximum for CFL.

Can the original CFL configuration be used on a dimmer?

The manual says not to use CFL bulbs on dimming circuits; it notes dimming is workable with the allowed incandescent lamp.

Research standard for this model

This guide separates facts documented for the exact model from measurements or compatibility checks that still have to be made on the installed fixture. It does not assume that a visually similar Portfolio product shares glass, brackets, sockets or electrical parts.

Source basis: Surviving Portfolio LC0343BN installation guide, item 0094552. Page research updated October 6, 2026.

Editorial review: Philip Meyer. For broader methodology and site ownership information, see About PortfolioLighting.net.