Home › Portfolio Model Parts Directory › FY06-043-1
📦Shop Portfolio-Compatible Lighting Parts on AmazonAffiliate link · We may earn a commission.🔧Find Discontinued Portfolio Parts on eBayAffiliate link · We may earn a commission.
Outdoor Wall Lantern • 13.43-Inch Black Steel Fixture
Portfolio FY06-043-1 / 0255322 Gloss Black Wall Lantern Parts & Repair Guide
Portfolio FY06-043-1, Lowe’s item 0255322, is a gloss-black steel outdoor wall lantern documented at approximately 13.43 inches high, 5.39 inches wide and 5.94 inches deep. It uses one medium-base lamp up to 60 watts and shares a surviving instruction manual with sibling FY06-044-1 / item 0255323.
ModelFY06-043-1
Lowe’s item0255322
Lamp1 × medium base, 60W max
Size13.43H × 5.39W × 5.94D in.
Exact dimensions help separate the two sibling records
Lowe’s archived product data identifies FY06-043-1 at roughly 13.43 inches high, 5.39 inches wide and 5.94 inches deep. The shared manual also lists FY06-044-1 / item 0255323, so do not assume a loose manual proves which sibling is installed; use the fixture label and dimensions.
The documented lamp is one medium-base 60-watt maximum
The original product record specifies a single medium-base incandescent lamp up to 60 watts. A lower-wattage LED can be a practical replacement when its base, physical envelope and location rating are appropriate, but the fixture’s marked maximum remains the ceiling.
Flat glass is part of the identification
Archived product data describes a black steel fixture with flat glass. If replacing a broken pane, record thickness, exact width/height, edge treatment and retention method. A glass shop can often reproduce simple flat panes more reliably than a listing for vaguely similar Portfolio glass.
The cover and decorative nut matter during top-side service
The manual shows a decorative nut securing a cover to the fixture. If the top assembly rattles or admits water, inspect the nut, cover seating and any sealing surfaces before tightening aggressively; overtightening aged glass or cast components can create new damage.
Shared manual does not mean shared every part
FY06-043-1 and FY06-044-1 appear in the same instruction booklet, which is useful for wiring and assembly research. It is not proof that their glass, body dimensions or decorative components are interchangeable. Confirm the exact model before buying cosmetic parts.
A loose backplate is a mounting problem first
If the lantern rocks on the wall, inspect the outlet box, bracket/nipple arrangement and mounting hardware. Do not use the decorative cover hardware to compensate for a bracket that is not seated correctly.
Weather damage starts with the water path
When rust or socket corrosion appears, inspect the wall interface and top of the fixture for water entry. Replacing the lamp or socket without stopping recurring moisture usually produces a short-lived repair.
Replacement strategy for simple flat glass
Because the fixture uses flat glass, custom-cut replacement may be feasible if original glass is unavailable. Remove an intact matching pane when possible and use it as the dimensional template; do not estimate from exterior fixture dimensions.
FY06-043-1 symptom map
SymptomInspect firstExact-model clueFlat pane brokenExact pane dimensionsSimple flat glass may be custom cut.Fixture looseBracket/nipple/mounting pathDo not compensate with decorative hardware.Lamp darkMedium-base lamp then supply60W maximum is documented.Wrong sibling suspectedLabel + 13.43 × 5.39 × 5.94 dimensionsManual also covers FY06-044-1.
What the archive can state confidently
The model/item pairing, black steel construction, flat glass, approximate dimensions and 60-watt medium-base lamp are documented. Parts interchange with FY06-044-1 remains unverified unless a component is explicitly shared or physically measured.
Where FY06-043-1 fits in the Portfolio technical archive
Use this page for the exact FY06-043-1 record. For broader identification and parts research, move upward to the Portfolio model parts directory or master model technical database. For exterior fixtures, the Portfolio outdoor lighting guide covers weather exposure and installation context; indoor vanity work belongs with the indoor lighting pillar.
FY06-043-1 FAQ
What Portfolio item number matches FY06-043-1?
The surviving documentation pairs model FY06-043-1 with Lowe’s item 0255322.
Can I use parts from a similar Portfolio fixture?
Only after verifying the actual dimensions, thread, electrical rating and retention method. A similar family name or appearance is not a compatibility guarantee.
Research standard for this model
This guide separates documented exact-model facts from repair inference. Where the surviving manual or archived product record does not establish a dimension or interchange, the page tells the owner what to measure rather than inventing a specification.