Home › Portfolio Model Parts Directory › FS130125-29
📦Shop Portfolio-Compatible Lighting Parts on AmazonAffiliate link · We may earn a commission.🔧Find Discontinued Portfolio Parts on eBayAffiliate link · We may earn a commission.
Outdoor Wall Light • Dovray Full-Cutoff Design
Portfolio FS130125-29 / 0337487 Dovray Dark-Sky Wall Lantern Parts & Repair Guide
Portfolio FS130125-29, Lowe’s item 0337487, is the Dovray outdoor wall lantern: a compact oil-rubbed-bronze, full-cutoff fixture documented at about 7.75 inches high by 7.85 inches wide by 8.9 inches deep. It uses one standard medium-base lamp up to 60 watts and has a simple crossbar mounting system.
ModelFS130125-29
Lowe’s item0337487
Lamp1 × medium base, 60W max
Size7.75H × 7.85W × 8.9D in.
Why the Dovray shape matters
The Dovray is a full-cutoff-style wall fixture: its shade directs light downward instead of exposing a glowing lamp in every direction. If an owner is replacing several fixtures and wants to preserve the original lighting effect, beam direction and shielding matter as much as matching the bronze finish.
Documented dimensions make used-fixture matching easier
Surviving product records put the fixture at roughly 7.75 inches high, 7.85 inches wide and 8.9 inches deep. Those dimensions are useful when distinguishing FS130125-29 from visually similar Portfolio wall lights. Measure the installed fixture before buying a used replacement because photos can hide scale.
The lamp path is unusually straightforward
This model uses one standard Edison/medium-base lamp with a 60-watt maximum in the original documentation. A modern LED can reduce heat and energy use, but the actual lamp must physically fit under the shade and be suitable for the fixture/location. Never exceed the marked fixture rating.
Crossbar geometry is the first mounting check
The manual identifies two short mounting screws, three wire nuts, two long mounting screws and a crossbar. If the fixture will not sit flat, compare the original crossbar, outlet-box attachment and screw projection before blaming the fixture body.
Dark-sky performance can be lost with the wrong replacement
A replacement lamp that protrudes below the shade or a substitute fixture with an exposed lens can change the cutoff behavior. If preserving downward-only light is important, compare the lamp envelope and shade position after relamping.
Oil-rubbed bronze finish repair should stay cosmetic
Finish wear is separate from structural corrosion. Clean gently and avoid abrasive refinishing near electrical joints. If rust has thinned the mounting plate, shade support or fasteners, cosmetic touch-up is not a structural repair.
Water entry: inspect the wall interface first
A downward shade does not prevent moisture from entering behind the backplate. Look at top/side sealing, the outlet-box opening and wall surface. Correct the water path before replacing corroded connectors or socket components.
What to preserve when the fixture is discontinued
Keep the original crossbar, screws and any intact mounting pieces with the fixture even if it is temporarily removed. They provide thread and spacing references that make later substitution much more reliable.
FS130125-29 symptom map
SymptomInspect firstExact-model clueLight spills upwardLamp projection / shade positionDovray is documented as a full-cutoff design.Fixture looseCrossbar and mounting screwsManual documents a simple crossbar system.Lamp will not fitA19/E26 envelope and shade clearanceDo not exceed the 60W fixture rating.Rust at wallBackplate water pathCorrect moisture source before electrical repair.
What the surviving evidence establishes
The model/item pairing, Dovray identity, full-cutoff exterior use, approximate dimensions and one-lamp 60-watt medium-base configuration are documented. That does not establish interchangeability with later Harbor Breeze-branded Dovray listings or other Portfolio wall lanterns.
Where FS130125-29 fits in the Portfolio technical archive
Use this page for the exact FS130125-29 record. For broader identification and parts research, move upward to the Portfolio model parts directory or master model technical database. For exterior fixtures, the Portfolio outdoor lighting guide covers weather exposure and installation context; indoor vanity work belongs with the indoor lighting pillar.
FS130125-29 FAQ
What Portfolio item number matches FS130125-29?
The surviving documentation pairs model FS130125-29 with Lowe’s item 0337487.
Can I use parts from a similar Portfolio fixture?
Only after verifying the actual dimensions, thread, electrical rating and retention method. A similar family name or appearance is not a compatibility guarantee.
Research standard for this model
This guide separates documented exact-model facts from repair inference. Where the surviving manual or archived product record does not establish a dimension or interchange, the page tells the owner what to measure rather than inventing a specification.