Home › Portfolio Model Parts Directory › FB12-001
📦Shop Portfolio-Compatible Lighting Parts on AmazonAffiliate link · We may earn a commission.🔧Find Discontinued Portfolio Parts on eBayAffiliate link · We may earn a commission.
Outdoor Wall Lantern • Original Glass Part Numbers Survive
Portfolio FB12-001 / 0356737 3-Light Candelabra Wall Lantern Parts & Repair Guide
Portfolio FB12-001, Lowe’s item 0356737, is a three-light outdoor wall lantern with unusually valuable replacement-parts documentation. The manual preserves original numbers for both glass sizes, the rubber ring, cap nut, wire nut, machine screw, mounting screw and crossbar—making this one of the stronger discontinued Portfolio lanterns for evidence-based repair.
ModelFB12-001
Lowe’s item0356737
Lamps3 × candelabra, 60W max each
GlassGC-031 small / GC-030 large
Two different original glass numbers survive
The replacement list identifies GC-031 as the small glass and GC-030 as the large glass. That is far more useful than searching for generic “Portfolio lantern glass.” Before ordering old stock or a substitute, still compare dimensions and mounting geometry because a matching number in a seller title is not proof of the physical part.
The rubber ring has its own original number
The manual identifies rubber ring 410-100400. A hardened or missing ring can allow movement and moisture at the cap/glass assembly. If fabricating a substitute, match thickness, inside/outside diameter and material suitability rather than using an arbitrary plumbing washer.
Original mounting hardware numbers are documented
The manual lists cap nut 110-080700, wire nut 375-022000, machine screw 109-042600, mounting screw 109-043500 and crossbar 152-103005. These are research keys for identifying original hardware; modern electrical connectors should still be selected for the actual conductors and current listing requirements.
Three candelabra lamps change troubleshooting
The fixture accepts three candelabra-base lamps, up to 60 watts each in the original incandescent specification, or the manual’s lower-wattage CFL alternative. If one lamp is dark, test that lamp/socket position first. If all three fail together, investigate supply, switch and fixture wiring upstream.
Glass replacement should start with the exact position
FB12-001 uses four small and four large glass pieces. Record whether the missing pane is a small or large position before shopping. GC-031 and GC-030 are not interchangeable labels for the same pane.
The finial, cap and cover form a mechanical stack
The package list includes a large finial, cover, caps, washer, hex nut, small finial and rubber rings. Photograph the order before disassembly. A lantern that rattles after cleaning is often reassembled with a washer/ring/finial stack out of sequence rather than needing a new fixture.
The manual preserves a drainage detail
The installation guidance calls for silicone glass sealant between wall and cover while leaving the underside open so condensed moisture can drain. If an older lantern has been caulked around all four sides, inspect for trapped moisture before replacing corroded parts.
Parts sourcing hierarchy for FB12-001
Search the original part number first, then verify measurements against the removed part. If original glass is unavailable, a custom glass shop may be a better path than forcing a near-match. For mounting hardware, retain originals whenever they remain structurally sound.
FB12-001 symptom map
SymptomInspect firstExact-model clueSmall pane brokenGC-031Original small-glass number survives.Large pane brokenGC-030Original large-glass number survives.Water trapped behind coverBottom drainage openingManual says leave underside unsealed.Lantern rattlesFinial/cap/ring stackPhotograph hardware order before disassembly.One of three lamps darkThat candelabra lamp/socketOther operating lamps isolate the fault.
What the part numbers do—and do not—prove
The original numbers establish what Portfolio listed for FB12-001. They do not guarantee that a current marketplace item using the same words is genuine, dimensionally correct or safe. Verify the physical component before installation.
Where FB12-001 fits in the Portfolio technical archive
Use this page for the exact FB12-001 record. For broader identification and parts research, move upward to the Portfolio model parts directory or master model technical database. For exterior fixtures, the Portfolio outdoor lighting guide covers weather exposure and installation context; indoor vanity work belongs with the indoor lighting pillar.
FB12-001 FAQ
What Portfolio item number matches FB12-001?
The surviving documentation pairs model FB12-001 with Lowe’s item 0356737.
Can I use parts from a similar Portfolio fixture?
Only after verifying the actual dimensions, thread, electrical rating and retention method. A similar family name or appearance is not a compatibility guarantee.
Research standard for this model
This guide separates documented exact-model facts from repair inference. Where the surviving manual or archived product record does not establish a dimension or interchange, the page tells the owner what to measure rather than inventing a specification.