Home › Portfolio Model Parts Directory › 37318
📦Shop Portfolio-Compatible Lighting Parts on AmazonAffiliate link · We may earn a commission.🔧Find Discontinued Portfolio Parts on eBayAffiliate link · We may earn a commission.
3-Light Vanity Bar • Factory Part Numbers Documented
Portfolio 37318 / 0036532 Vanity Light Parts & Repair Guide
Portfolio model 37318, Lowe’s item 0036532, is one of the strongest parts-recovery records in the archive because its manual preserves six original component numbers. Instead of searching for a vague “Portfolio vanity replacement,” an owner can start with the exact glass, bracket, connector, screw and knob identifiers and then verify dimensions against the surviving fixture.
Model37318
Lowe’s item0036532
Fixture3-light vanity bar
Glass partGS37318
Original 37318 replacement parts
Part numberOriginal descriptionRepair significanceGS37318Glass shadeBest identifier for an original-style shade; still verify dimensions and retention.WC001Wire connectorElectrical connector reference; use a currently listed connector sized for the conductors.SCR832X050Short machine screwThe code itself indicates an 8-32 machine-screw family and .50-inch nominal length.TK1X832-CHThreaded knobChrome-finish threaded knob associated with the fixture mounting system.SCR832X100Long machine screw8-32 family with 1.00-inch nominal length.XBAR05Mounting bracketOriginal crossbar/bracket identifier.
Glass shade GS37318: what the manual tells us
The assembly instructions show each glass shade seated inside a socket cover and retained by thumbscrews. That matters when sourcing a replacement: the critical dimensions are not only the shade height and diameter, but the neck/opening geometry that fits inside the cover and the area contacted by the retaining screws. Measure an intact shade rather than estimating from a photograph.
Why the 8-32 screw identifiers are useful
The original short and long screw numbers encode the same 8-32 machine-screw family at different lengths. That gives an owner a concrete starting point, but replacement still requires checking head style, usable thread length and where the screw sits in the mounting assembly. Do not substitute a longer screw where it can contact conductors or prevent the fixture from seating against the wall.
Mounting bracket XBAR05 and threaded knob TK1X832-CH
A loose vanity bar can be caused by the crossbar, mounting screws or decorative threaded knobs rather than the fixture body. Inspect the XBAR05 bracket for bending and confirm that the outlet box itself is secure. If only a knob is missing, preserve the remaining TK1X832-CH as a physical thread sample before shopping.
Three sockets means troubleshooting should be comparative
With a three-light bar, one dead lamp while the other two operate points toward that lamp/socket position rather than loss of branch-circuit power to the entire fixture. If all three go dark together, check the wall control and fixture supply connections before replacing individual sockets. Heat discoloration at one socket is a different failure pattern from a whole-fixture outage.
Where this model belongs in the site architecture
This exact-model guide should handle 37318-specific parts. Broader bathroom placement, moisture and fixture-selection questions belong in the Portfolio bathroom-lighting guide; cross-model hardware research belongs in the model parts directory. That keeps the model page focused rather than turning it into another giant link list.
How the 37318 shade-retention system changes the glass search
The manual shows the glass installed inside a socket cover and secured with thumbscrews. That creates three fit checks: the shade neck must enter the cover, the thumbscrews must contact a suitable portion of the glass, and the lamp must still have safe clearance. When measuring an intact GS37318 shade, record the neck outside diameter at several points because hand-formed glass can vary slightly. Also record the distance from the shade lip to the area where the thumbscrews contact it.
Do not overtighten a thumbscrew to compensate for an undersized replacement neck. Point loading can crack glass. If one screw no longer advances smoothly, inspect its threads and the threaded hole in the socket cover before blaming the shade.
Decode the original hardware before shopping
SCR832X050 and SCR832X100 are especially informative identifiers: both point to an 8-32 machine-screw family, with nominal lengths of one-half inch and one inch respectively. That lets you verify a replacement with a thread gauge instead of relying on a seller’s fixture-brand claim. TK1X832-CH likewise points toward an 8-32 threaded decorative knob in a chrome finish. Preserve one original screw and knob as physical references.
XBAR05 identifies the original mounting bracket, but a substitute crossbar must be checked against both the outlet box and the fixture. The important dimensions are not just overall bracket length; they include box-screw spacing, fixture-screw spacing, screw projection and whether the bracket clears the conductors behind the bar.
Three-light comparative troubleshooting
PatternLikely diagnostic zoneNext observationOnly left lamp darkLeft lamp/socket positionSwap a known-good lamp; inspect that socket if the failure stays in place.Two lamps dark, one worksLamp condition plus local connectionsCompare sockets for heat, corrosion and contact damage.All three darkShared supply/controlCheck wall switch, branch supply and fixture wire connections before replacing sockets.Shade loose on one headThumbscrews/socket coverCompare the working heads to identify missing or damaged retention hardware.Whole bar rocks on wallXBAR05/mounting systemInspect outlet-box security and bracket/8-32 hardware.
When an original part number is better than a generic search term
Searching GS37318 is more precise than searching “Portfolio vanity glass,” and XBAR05 is more precise than “light bracket.” But original numbers should still be verified against photographs and dimensions because used or old-stock listings can be mislabeled. The strongest purchase record combines the exact part number, a visual match, dimensions and the seller’s return policy. That evidence-first approach is more reliable than assuming all three-light Portfolio vanity bars shared the same glass or crossbar.
Where this exact model fits in the Portfolio archive
This page stays narrow: it documents 37318 rather than trying to become another sitewide directory. Use these broader resources only when the repair question moves beyond this exact fixture.
Master Model Technical Database
Use the database to cross-reference another Portfolio model or item number. It is the comprehensive model index, while this page remains specific to 37318.
Model Parts Directory
Use the parts directory when the failed component may appear across multiple Portfolio products and you need a broader parts-oriented route.
37318 FAQ
What is the original glass shade number for Portfolio 37318?
The manual lists GS37318 as the glass shade.
What mounting bracket is documented?
The replacement-parts list identifies XBAR05 as the mounting bracket.
Are the original mounting screws the same length?
No. SCR832X050 is the short machine screw and SCR832X100 is the long machine screw; both are in the 8-32 family but have different nominal lengths.
Research standard for this model
This guide separates facts documented for the exact model from measurements or compatibility checks that still have to be made on the installed fixture. It does not assume that a visually similar Portfolio product shares glass, brackets, sockets or electrical parts.
Source basis: Portfolio 37318 / item 0036532 manual and replacement-parts list. Page research updated October 6, 2026.
Editorial review: Philip Meyer. For broader methodology and site ownership information, see About PortfolioLighting.net.