- Home
- Portfolio Lighting Parts & Accessories
- Portfolio Model Parts Directory
- Portfolio 0486006 / RS40PB-R8-RS-C8
📦Shop Portfolio-Compatible Lighting Parts on AmazonAffiliate link · We may earn a commission.🔧Find Discontinued Portfolio Parts on eBayAffiliate link · We may earn a commission.
Use both identifiers when researching this solar kit
The quick-start manual identifies ITEM #0486006 and MODEL #RS40PB-R8-RS-C8 as an eight-count solar path-light set. Old resale listings may use only 0486006, while manuals may be indexed by the longer model. Save both. This also prevents confusion with wired low-voltage Portfolio fixtures that can look similar but depend on a central transformer.
What the original kit contains
The surviving instructions identify eight top housings, eight lenses, eight rings, eight mounting poles and eight ground spikes. That component breakdown is useful because a broken stake or cloudy lens is a mechanical/optical repair, while a top-housing problem involves the solar panel, battery and electronics. Diagnose the failed section before shopping for a complete replacement light.
Newly assembled light does not work: remove the isolation tag and charge it
The original instructions tell the owner to remove the isolation tag from the bottom of the top housing and allow the solar panel to receive roughly 10–12 hours of charging. A stored or newly assembled light can therefore appear defective when the battery has never been enabled or charged. Give a known-good unit a proper daylight charge before judging runtime, especially after long storage.
One light is dim while seven are normal
When only one of eight identical lights performs poorly in the same location, use the working units as controls. Swap positions for a full charging cycle. If the problem follows the light, focus on its panel cleanliness, battery condition, contacts and water intrusion. If the problem stays at the location, shade from plants, structures or seasonal sun angle is more likely. This simple swap test is more informative than immediately buying eight new batteries.
All eight lights have shorter runtime
A set-wide change points toward shared conditions: shorter winter days, several cloudy days, new shade from vegetation, dirty panels or simply batteries of the same age reaching the end of useful capacity together. Clean all panels with a nonabrasive method, compare direct-sun exposure and observe the set after a genuinely sunny charging day. Solar runtime is an energy-budget problem: less energy collected during the day means less light available at night.
Battery replacement: match chemistry and specification, not just size
Do not choose a battery because it physically fits. Open one unit only as the instructions permit and record the battery chemistry, voltage, capacity, terminal style and orientation printed on the original cell. Solar garden lights use charging electronics designed around a particular rechargeable battery type. Substituting a non-rechargeable cell or incompatible chemistry can damage the light or create a safety problem.
Water inside the top housing or lens
Condensation after a rapid temperature change is different from standing water. Repeated water accumulation suggests a failed seam, cracked lens, displaced seal or damage around the top housing. Drying the light without correcting the entry path only resets the symptom. Inspect the lens/ring fit and housing before replacing electronics. If corrosion has reached the battery contacts or circuit board, replacement of the top housing/light may be more practical than repeated cleaning.
Broken ground spike or mounting pole
A snapped spike does not mean the solar electronics are bad. Measure the pole outside diameter, insertion depth and the way the spike engages the pole. A universal replacement stake can be a good repair when dimensions match. Do not force an oversized stake into the pole or use a loose undersized insert that lets the fixture lean. Loosen hard soil before installation rather than hammering the plastic assembly.
Cloudy lens and weak-looking light
Before blaming the LED, clean the lens and compare it with a working unit. UV exposure and abrasion can reduce clarity, and dirt inside the lens can scatter light. If the LED is actually weaker after a full charge and position swap, the battery is a more likely service item than the LED itself. Integrated solar LEDs and control boards are usually less economical to replace individually than the battery or mechanical pieces.
When mixing replacements with the surviving lights
If only one or two originals are beyond repair, a visually similar solar path light may be acceptable, but compare color temperature, height, lens shape and nighttime brightness. A very bright cool-white replacement can look conspicuous beside aged warm-white originals. Move unmatched replacements to the ends of a path or replace symmetrical pairs when appearance matters.
Related Portfolio solar and landscape resources
For broader research, use the Portfolio model-number lookup, model parts directory, manuals library, and troubleshooting hub. Those pages help separate an exact-model problem from a system problem and keep replacement research tied to the label on the product rather than to appearance alone. For solar-specific comparisons, continue through the landscape lighting library. Remember that transformer troubleshooting does not apply to this self-contained solar set.
Use a controlled overnight comparison to judge battery health
After a sunny day, place one weak light and one strong light side by side where they receive the same late-afternoon sun. Clean both panels first. Record when they turn on and check them at fixed intervals rather than relying on memory. If the weak unit fades hours earlier under the same charging conditions, its battery or internal electronics are more suspect. If both perform similarly in the test location, the original placement is likely limiting charge. This comparison is especially useful in autumn when tree shadows move and make a previously sunny location poor for charging.
Winter performance is not the same thing as permanent failure
Short days, low sun angles, snow cover and cold rechargeable cells can reduce apparent performance even when the light is functional. Evaluate the set after a clear charging day before replacing batteries. Clear snow from panels without scratching them and move a test unit to better sun if necessary. If runtime recovers in stronger sun, the system is energy-limited rather than electrically dead. If a unit remains poor after equal charging beside a strong sibling, then battery aging, corrosion or electronics become more credible causes.
Keep one healthy light as your reference unit
When several solar lights age together, mark the strongest surviving unit and use it as a reference during testing. Compare panel cleanliness, battery labeling, lens condition and overnight runtime against that known-good light. A reference unit makes troubleshooting much less subjective and helps prevent replacing batteries or housings that are actually performing normally for the available sunlight.