1. Home
  2. Portfolio Lighting Parts & Accessories
  3. Portfolio Model Parts Directory
  4. Portfolio 0482293 / WL128MBK

📦Shop Portfolio-Compatible Lighting Parts on AmazonAffiliate link · We may earn a commission.🔧Find Discontinued Portfolio Parts on eBayAffiliate link · We may earn a commission.

Confirmed model facts before you start

The factory guide identifies item 0482293 as WL128MBK and item 0482294 as WL129MBK.

The installation guide explicitly treats the fixture as suitable for wet or damp locations when installed on an appropriately protected and grounded supply.

The documented hardware includes a mounting strap, decorative nuts, screws, nuts and three wire connectors.

Before ordering anything, compare the label and physical dimensions with the Portfolio model lookup, model parts directory and parts hub.

Start at the branch circuit, not the finish

A wall lantern that is completely dead needs an electrical sequence: breaker, switch, known-good bulb, socket, then fixture wiring. Do not let a weathered finish convince you the housing is the cause. If the bulb works in another fixture but not here, shut off the breaker and verify the connections in the outlet box. Loose wire connectors and deteriorated neutral splices can produce intermittent behavior that looks like a bad socket.

Field note: Work from the symptom toward the failed component. Record what changes after each test instead of replacing several parts at once. That preserves the evidence you need to tell a fixture fault from a wiring, mounting, charging or control problem on 0482293 / WL128MBK.

Wet-location installation raises the standard

The manual specifically addresses wet/damp use and grounding. That means the quality of the outlet box, gasketed mounting surface and weather sealing is part of the repair. A replacement lantern cannot compensate for a loose box or an opening that funnels water into the wiring cavity. If the box is damaged or the grounding method is uncertain, stop the fixture-level repair and correct the electrical installation first.

Field note: Work from the symptom toward the failed component. Record what changes after each test instead of replacing several parts at once. That preserves the evidence you need to tell a fixture fault from a wiring, mounting, charging or control problem on 0482293 / WL128MBK.

Mounting strap fit and backplate coverage

The mounting strap is the mechanical bridge between the outlet box and lantern. If the fixture sits crooked, check screw projection and strap orientation before enlarging holes or modifying the backplate. A modern replacement should cover the existing box opening and siding cutout. Measure backplate height and width, screw spacing and projection from the wall before shopping.

Field note: Work from the symptom toward the failed component. Record what changes after each test instead of replacing several parts at once. That preserves the evidence you need to tell a fixture fault from a wiring, mounting, charging or control problem on 0482293 / WL128MBK.

Socket and bulb symptoms

Flicker when the wall is bumped can indicate a loose bulb, worn socket contact or wiring movement. A bulb that repeatedly blackens or fails early can indicate heat, moisture or supply problems. With power off and the bulb removed, look for pitting, carbon marks and corrosion. Do not scrape a severely burned socket back into service; electrical damage at the contact is a reason to replace the socket assembly or fixture.

Field note: Work from the symptom toward the failed component. Record what changes after each test instead of replacing several parts at once. That preserves the evidence you need to tell a fixture fault from a wiring, mounting, charging or control problem on 0482293 / WL128MBK.

Use WL129MBK as a sibling reference carefully

Item 0482294 / WL129MBK appears in the same factory guide, so it is useful when you need assembly context. It is not permission to order a visible part without measuring. Lantern size, decorative geometry or panel dimensions may differ. Treat shared documentation as a wiring and hardware clue, then use the actual WL128MBK dimensions for glass, cover and body parts.

Field note: Work from the symptom toward the failed component. Record what changes after each test instead of replacing several parts at once. That preserves the evidence you need to tell a fixture fault from a wiring, mounting, charging or control problem on 0482293 / WL128MBK.

Replacement checklist

For replacement, record the fixture height, width, wall projection, backplate size, bulb base, maximum lamp rating from the label and whether the location is fully exposed to rain. Photograph the wiring before disconnection after power is confirmed off. A good replacement is one that fits the box, covers the wall opening, is rated for the exposure and provides service access without forcing the wiring behind the backplate.

Field note: Work from the symptom toward the failed component. Record what changes after each test instead of replacing several parts at once. That preserves the evidence you need to tell a fixture fault from a wiring, mounting, charging or control problem on 0482293 / WL128MBK.

Symptom-to-fix table

Completely deadConfirm source power or solar charge, then test the simplest serviceable component before opening the housing.IntermittentLook for loose contacts, corrosion, moisture, weak battery or wiring that changes when the fixture moves.Dim outputCheck lamp/battery condition, dirty optical surfaces, voltage/charge availability and heat or corrosion at contacts.Water insideDisconnect power where applicable, dry the fixture, identify the entry path and replace damaged electrical parts before reuse.Broken mountingMeasure original geometry and hardware; do not let improvised mounting create a falling-fixture or water-entry hazard.

This record is especially valuable when factory replacement parts are discontinued because it lets you compare a modern substitute by function and dimensions instead of by appearance alone.

How to document a discontinued Portfolio fixture

LabelPhotograph the full model/item number before cleaning the label.ElectricalRecord voltage, bulb/battery type and any wattage or chemistry markings.MechanicalMeasure mounting diameter, backplate/post fit, screw spacing and visible part dimensions.ConditionPhotograph corrosion, cracks, water tracks and heat discoloration before disassembly.ReplacementKeep the original until the new part is installed so you can compare fit directly.

This record is especially valuable when factory replacement parts are discontinued because it lets you compare a modern substitute by function and dimensions instead of by appearance alone.

Related Portfolio repair resources

Continue with Portfolio troubleshooting, replacement parts, manuals, discontinued Portfolio lighting and the technical archive.