- Home
- Portfolio Lighting Parts & Accessories
- Portfolio Model Parts Directory
- Portfolio 00951 / 0294715
Confirmed four-light set
The surviving documentation identifies Portfolio Outdoor model 00951 as item 0294715 and a set of four solar landscape lights. The package list names the top cover, battery cover, housing, post and stake, with four of each. That four-fixture layout is valuable for troubleshooting because three lights can serve as controls when one behaves differently. Keep the model and item number together in your records so replacement searches do not confuse this set with similarly shaped Portfolio solar products.
For model 00951, keep item 0294715 with your photos and measurements. Confirm the exact electrical rating and physical fit from the fixture label or original documentation before substituting parts; similar-looking Portfolio products are not automatically interchangeable.
Turn four fixtures into a diagnostic matrix
Place all four 00951 lights together in the same unobstructed sun for one full day. At dusk, record which lights turn on, their relative brightness and how long each operates. One weak light among three strong ones points to that fixture’s battery, contacts or solar head. Four weak lights point toward common age, weather or charging conditions. Two weak lights can suggest batteries aging at different rates. This side-by-side test removes location as a variable and gives you far more information than testing each light in its normal landscaping position.
For model 00951, keep item 0294715 with your photos and measurements. Confirm the exact electrical rating and physical fit from the fixture label or original documentation before substituting parts; similar-looking Portfolio products are not automatically interchangeable.
Battery service without guessing
The manual identifies a battery cover for each light, so battery access is part of the service design. Before replacement, read the existing rechargeable cell and match chemistry, voltage and physical size. Do not use a non-rechargeable battery in a solar charging circuit. Inspect the spring and flat contacts for oxidation and make sure the battery cover closes correctly. After installing a compatible rechargeable cell, give the fixture a full daylight charge before judging runtime. A new battery tested after only a short charge can make a healthy light appear defective.
For model 00951, keep item 0294715 with your photos and measurements. Confirm the exact electrical rating and physical fit from the fixture label or original documentation before substituting parts; similar-looking Portfolio products are not automatically interchangeable.
One light never turns on
Start by swapping locations, not parts. Put the dark 00951 beside a working unit and charge both equally. Cover the solar surface to simulate night. If the failed unit remains dark, inspect battery seating and contacts. If a known-compatible charged battery still produces no light, the problem is likely in the solar-head electronics, LED or internal wiring. Because these compact solar heads are not generally designed for component-level field repair, replacement of the head or entire fixture is usually safer than improvised rewiring.
For model 00951, keep item 0294715 with your photos and measurements. Confirm the exact electrical rating and physical fit from the fixture label or original documentation before substituting parts; similar-looking Portfolio products are not automatically interchangeable.
One light dies hours before the others
Runtime comparison is especially powerful in a four-pack. Time all four after the same sunny day. If one shuts off much earlier, move its battery into a working fixture only if the cells are identical and the swap can be done safely. If the short runtime follows the battery, replace the cell. If the weakness stays with the fixture, inspect charging surface, contacts and internal condition. This controlled swap prevents throwing away a good solar head because of an exhausted rechargeable battery.
For model 00951, keep item 0294715 with your photos and measurements. Confirm the exact electrical rating and physical fit from the fixture label or original documentation before substituting parts; similar-looking Portfolio products are not automatically interchangeable.
Post and stake failures
A broken stake is a mechanical problem, not an electrical diagnosis. Pull the post straight out of the soil rather than twisting the solar head. Compare the failed stake with one of the three intact examples and record diameter, length and engagement depth. That intact mate is your best physical template for finding or fabricating a replacement. If the post itself is cracked, measure it separately. Do not use a substitute that leaves the fixture unstable where people or lawn equipment can strike it.
For model 00951, keep item 0294715 with your photos and measurements. Confirm the exact electrical rating and physical fit from the fixture label or original documentation before substituting parts; similar-looking Portfolio products are not automatically interchangeable.
Cloudy lenses and dirty solar surfaces
Dirt affects this product in two different ways. Contamination on the solar collector reduces charging; haze on the light-transmitting housing reduces visible output. Clean with mild methods that do not scratch plastic. If the fixture charges well but still looks dim beside its mates, compare lens clarity before assuming the LED is failing. Severe UV degradation may make full fixture replacement more practical because polishing cannot restore brittle plastic or lost weather resistance.
For model 00951, keep item 0294715 with your photos and measurements. Confirm the exact electrical rating and physical fit from the fixture label or original documentation before substituting parts; similar-looking Portfolio products are not automatically interchangeable.
Moisture and battery-cover inspection
Because each 00951 has a removable battery cover, inspect that interface whenever you see corrosion or intermittent operation. Water marks around the cover can reveal an entry path. Dry the unit fully and clean only superficial corrosion. If terminals are deeply pitted or the cover no longer seats, the fixture may no longer protect its rechargeable cell reliably. Avoid filling the compartment with sealant; future battery service and designed venting or drainage can be compromised.
For model 00951, keep item 0294715 with your photos and measurements. Confirm the exact electrical rating and physical fit from the fixture label or original documentation before substituting parts; similar-looking Portfolio products are not automatically interchangeable.
How to replace one fixture without ruining the row
If only one of four lights is beyond repair, a modern solar replacement may differ in height, color temperature, beam pattern and dusk threshold. Put the candidate next to an original at night before committing. For a formal walkway, replacing the full group may produce a better visual result. For a hidden garden location, a single functional substitute may be acceptable. Search by model 00951 and item 0294715 when looking for old stock, but verify physical condition and expect the rechargeable batteries in used fixtures to be aged.
For model 00951, keep item 0294715 with your photos and measurements. Confirm the exact electrical rating and physical fit from the fixture label or original documentation before substituting parts; similar-looking Portfolio products are not automatically interchangeable.
Maintenance log for a four-pack
Number the four lights discreetly on the underside and record runtime once or twice a year. Clean solar surfaces at the same time and inspect posts, stakes and battery covers. This creates a baseline: a fixture that drops from six hours to two hours while the other three remain stable is telling you something specific. Keeping model 00951, item 0294715 and the battery markings in the log makes future service faster even after retail documentation disappears.
For model 00951, keep item 0294715 with your photos and measurements. Confirm the exact electrical rating and physical fit from the fixture label or original documentation before substituting parts; similar-looking Portfolio products are not automatically interchangeable.
Related Portfolio repair resources
Continue with the Portfolio model parts directory, master model technical database, and troubleshooting center when the fault extends beyond this exact fixture.